Blog · ISO 45001
ISO 45001 explained: what it is and who needs it
ISO 45001 is an international standard for occupational health and safety management systems. It answers one question: how to organize work so that people at a company do not get injured or lose their health. The standard suits an organization of any size and industry.
Where the standard came from
ISO 45001 was published in 2018 and replaced the British document OHSAS 18001, which companies had worked to before. The current edition is from 2018, with the 2024 climate change amendment. A new edition is being prepared: we wrote about its status in the article on the revision of ISO 45001 and ISO 22000.
How a system differs from a health and safety department
Almost every production site has a health and safety department: briefings, logs, workwear, inspections. It usually works on the principle of “meet the requirements and avoid a fine”.
A management system works differently:
- The manager is responsible, not the safety engineer. The standard requires top management itself to be accountable for preventing injuries and ill health.
- Risks are looked for in advance. Hazards are identified before an incident, not after it.
- Workers participate. The people at the machine know more about the hazards than anyone. The standard requires them to be consulted and involved in decisions.
- Results are measured. Objectives are set, indicators are tracked, and once a year management reviews what has been achieved.
What the standard requires
Strip away the wording and a clear sequence of actions remains:
- Understand your organization. What work is done, who does it, which legal and customer requirements must be met.
- Identify hazards and assess risks. For every workplace and type of work: what can go wrong and how serious it is.
- Choose controls. More on this below.
- Train people and make sure they can work safely.
- Prepare for emergencies: who does what in case of fire, spill or collapse.
- Investigate incidents and look for the cause, not someone to blame.
- Check the system with internal audits and improve it.
The hierarchy of controls: where protection starts
The main idea of the standard is that protective measures are not equal. They are chosen in order, from strongest to weakest:
- Eliminate the hazard. Remove the hazardous operation entirely.
- Substitute a hazardous material or process with a less hazardous one.
- Apply engineering controls: guards, ventilation, interlocks.
- Apply administrative controls: instructions, signs, training, work permits.
- Provide personal protective equipment.
Helmets and gloves are at the end of the list for a reason. They do not remove the hazard but only soften the consequences, and they work only as long as the person remembers them. If a company answers every risk with “issue PPE and give a briefing”, the system exists only on paper.
Who needs ISO 45001
- Companies with hazardous work: mining, metallurgy, construction, energy, chemicals, transport
- Contractors of large companies: customers often make the certificate a condition for taking part in a tender or working on site
- Those who work with foreign partners and investors
- Those who already have ISO 9001 or ISO 14001: the standards share a common structure, and the systems are combined into one
The certificate is voluntary. It does not replace the requirements of labour law but helps meet them systematically rather than from time to time.
What the company gets
The standard does not promise zero injuries. It gives you control:
- The hazards at every workplace and the controls for each of them are known
- Incidents and dangerous situations are recorded and analysed
- Legal requirements are collected in one list, and it is clear what has been done
- Contractors on site work by the same rules as your own employees
Where to start
- Appoint a responsible person from among the managers and set up a working group that includes workers
- Compare what is already being done on health and safety with the requirements of the standard
- Draw up a list of hazards and assess the risks
- For the most serious risks, choose controls starting from the top of the hierarchy
- Train department heads and internal auditors
We cover the implementation procedure in detail at the seminar on developing an ISO 45001 health and safety system (in Russian).