Blog · HACCP
HACCP explained: what it is, what it stands for and the seven principles
HACCP is a way of managing food safety. A company identifies in advance the points in the process where a hazard to the consumer can arise and puts permanent controls in place there.
What HACCP is and why it is needed
HACCP is needed so that unsafe food does not reach the consumer. It replaces inspection of the finished product with control of the process itself: hazards are prevented where they arise.
HACCP: what the abbreviation stands for
HACCP stands for Hazard Analysis and Critical Control Points. Russian-language documents use a transliteration of the abbreviation, and sometimes Cyrillic letters that look like the Latin ones — it is the same thing.
The idea behind it
Inspecting the finished product is too late and too expensive: the batch has already been made. Besides, sample testing will not catch everything. HACCP moves control to where hazards arise: receiving raw materials, heat treatment, cooling, packaging.
Hazards are divided into three groups:
- Biological — bacteria, viruses, mould
- Chemical — detergent residues, pesticides, allergens that got into the wrong product
- Physical — glass, metal, plastic, bones
The seven principles of HACCP
- Conduct a hazard analysis. Go through the whole process and find out where and what hazards can arise.
- Determine the critical control points. These are the steps at which control is essential to prevent a hazard, eliminate it or reduce it to an acceptable level.
- Establish critical limits. For each point, a measurable boundary between “safe” and “unsafe”: temperature, time, an instrument reading.
- Establish monitoring. Who measures, with what, how often and where it is recorded.
- Establish corrective actions. What is done with the product and the process if a limit is breached.
- Establish verification procedures. How you make sure the whole system works.
- Keep documentation and records. Without records you cannot prove that control took place.
An example of a critical control point
A hypothetical example for a workshop that makes meat patties:
- Point: heat treatment
- Hazard: survival of pathogenic bacteria
- Critical limit: core temperature not lower than the one set by the technologist
- Monitoring: the cook measures the temperature with a probe in every batch and records it in the log
- Corrective action: the batch is cooked further and measured again
How a HACCP plan is developed
The seven principles are preceded by preparatory steps:
- Assemble a HACCP team: technologist, production manager, quality specialist
- Describe the product: ingredients, packaging, shelf life and storage conditions
- Determine who will consume it and how
- Draw up a flow diagram of the production process
- Verify the diagram on site, in the workshop
Then the seven principles are applied, resulting in a HACCP plan — a table for each critical control point.
What is needed for the system to work
- Prerequisite programme. Cleanliness of premises, water, pest control, staff hygiene. Without it there will be far too many critical points.
- Trained people. The cook must understand why they measure the temperature, not just fill in the log.
- Verification. From time to time the team reviews the records and makes sure the plan matches how the workshop works now.
How HACCP differs from ISO 22000
HACCP is a set of principles. ISO 22000 is an international management system standard that includes these principles and adds requirements for management, documentation and improvement. Certificates are issued against ISO 22000.